Wheeled · Full Electric · Zero Emission

WJ-R1 Autonomous Electric Mower

WHEELED 4WD · 790 MM TWIN-BLADE DECK

A quiet, exhaust-free, fully autonomous mower for professional turf. No boundary wire, no operator, no emissions — safe to run around the public all day at airports, parks, estates and municipal sites.

790 mm
Cutting width
4,000m²
Per battery pack
118 kg
Net weight
WANJI WJ-R1 wheeled fully-electric autonomous mower on a white background

Built for turf where noise and emissions are a problem

Municipal contracts, airport aprons and hospital grounds increasingly specify zero-emission equipment. The R1 meets that requirement without giving up deck width.

0

Zero emission, low noise

48V LiFePO4 electric drive. No exhaust, no fuel handling, no idle noise — practical for early-morning mowing near housing, hospitals and public buildings.

4W

4WD in-situ zero-turn

Four-wheel differential steering turns on the spot. Threads around trees, beds, benches and obstacles without a three-point turn or turf damage.

79

790 mm twin-blade deck

Two 850 W blades at 3,000 rpm, cutting height 20–100 mm through the lifting deck. Peak efficiency around 2,000 m² per hour.

2H

About 2 h per charge

Roughly 4,000 m² per pack, up to 2.5 hours on light turf. The 20A charger brings a pack back to full in about 2 hours.

DCK

Auto-charging dock

The machine returns to the dock on its own, recharges, and resumes the remaining schedule without an operator on site.

RTK

RTK-GNSS + LiDAR, no wire

Self-developed path planning with multi-zone scheduling. LiDAR fusion stops and reroutes around people, animals and debris, with alarms on the remote and app.

Technical specification

Figures apply to the standard WJ-R1 configuration. Final configuration is confirmed per order.

PlatformWheeled 4WD fully electric, zero emission
Cutting width790 mm
Cutting height20–100 mm (lifting deck)
BladesTwin blades, 850 W × 2
Blade speed3,000 rpm
Peak efficiency~2,000 m²/h
SteeringFour-wheel differential, in-situ zero-turn
BatteryLiFePO4 48V removable pack
Endurance~2 h per charge, up to 2.5 h (~4,000 m² per pack)
Battery swapRemovable pack, cold swap only — power off, release the rear locking pin. Not hot-swappable.
Fast charger20A, ~2 h to full charge, included
Auto charging dockIncluded — automatic return, recharge and resume
Net weight118 kg
Travel speed0–6 km/h
NavigationRTK-GNSS autonomous, self-developed path planning, no boundary wire
Obstacle avoidanceLiDAR fusion for dynamic obstacles
ControlLarge-screen 2.4G remote controller + mobile app with alarms
OperationAutonomous, scheduled, multi-zone

Battery packs are exchanged cold: the machine is powered off and the pack is released through the rear locking pin. There is no hot-swap path, so plan a charge window rather than a mid-shift pack change.

Typical sites

Airports & airfields Municipal parks & green spaces Large estates & campuses Sports grounds & training pitches Corporate & hospital grounds High-voltage substations

The 790 mm twin-blade deck, up close

Two discs, two 850 W blade motors, four independently driven wheels. Photographed on a WJ-R1 deck during assembly.

WJ-R1 790 mm twin-blade cutting deck with two blade discs and four independent wheel motors
Twin deck, four driven wheels. Each of the four wheels carries its own motor. That is what gives the R1 in-situ zero-turn without a steering linkage or a differential lock, and why it can rotate between benches and planted beds instead of three-point turning.
Close-up of a WJ-R1 blade disc showing the spindle bearing, mounting bolts and blade guard
Blade disc and guard. The blade mounts on a sealed spindle bearing under a pressed guard, so a blade change is two bolts and no spindle removal. Consumables are standard items sourced locally.

Frequently asked questions

Deck, fuel, drivetrain and support questions buyers raise before ordering.

What deck does the WJ-R1 use?

A 790 mm twin-blade lifting deck with a 20–100 mm cut range. Two 850 W blade motors run at 3,000 rpm, one per disc, so each side is driven independently and the machine keeps cutting when one disc is loaded.

How long does it run on one charge?

About 2 hours, up to 2.5 hours on light turf, covering roughly 4,000 m² per pack. The 48V LiFePO4 pack is removable, so a second pack extends the working window without waiting for a recharge.

What terrain is the R1 built for?

Manicured turf — airports, parks, corporate campuses, glamping sites and sports fields. It is a wheeled platform built for clean, quiet, repeatable cuts; embankments and rough brush are the tracked WJ-T series' job.

How does it turn?

Four-wheel differential drive with in-situ zero-turn. The machine rotates on the spot instead of doing a three-point turn, which is what keeps it usable between benches, tents and planted beds.

How is it charged?

An auto-charging dock is included, so the machine returns and docks itself at the end of a route. The pack can also be pulled for a manual swap or for off-season storage.

Fleet sizing and quotation

Tell us the mown area, the number of zones and the daily window you have. We will size the fleet against real charge cycles and issue a quotation for your destination.

Request a Quotation