Tracked Hybrid · Widest Deck

WJ-T-1300M Autonomous Mower

TRACKED HYBRID-ELECTRIC · 1,300 MM FOUR-BLADE DECK

The widest deck in the WANJI tracked range, for sites where area matters more than manoeuvrability — utility-scale solar, wind farms, long dam embankments and large orchard blocks. A twin-deck, four-blade arrangement covers 1,300 mm per pass, and a 19.0 L tank keeps it working for 6–7 hours. The WJ-T-1300M shares its chassis and drivetrain with the WJ-T-900M and WJ-T-1100M; the WJ-T-900A is a separate, narrower platform with its own specification.

1,300mm
Cutting width
60°
Max slope
5,500m²/h
Peak output
WANJI WJ-T-1300M tracked hybrid-electric autonomous mower

One chassis, the widest deck

The WJ-T-1300M shares its chassis, powertrain, navigation and safety system with the WJ-T-900M and WJ-T-1100M, and carries the widest deck of the three. All run the same 10–200 mm cut range. The WJ-T-900A is a separate platform with its own deck geometry and a 20–150 mm range, so specifications are quoted per model rather than carried across the range.

13

1,300 mm twin deck

Two deck sections carry four swing blades across 1,300 mm. Fewer passes on long, open runs such as wind farm access tracks and dam crests.

5.5K

4,500–5,500 m²/h peak output

The highest throughput in the WANJI tracked range, for utility-scale solar and long corridors where area matters more than manoeuvrability.

60°

Slopes up to 60°

Rubber tracks with low ground pressure keep the machine planted on embankment faces and cut slopes beyond what wheeled mowers can hold safely.

HY

Engine cuts, battery moves

Briggs & Stratton 810cc 27 HP drives the cutting deck only. A separate battery pack drives the tracks, so no mains power is needed on site.

19L

6–7 hours on one tank

A 19.0 L tank gives the WJ-T-1300M a 6–7 hour run — enough for a full shift on remote solar and wind sites where refuelling points are not available.

RTK

RTK-GNSS, no boundary wire

Maps the site once, then repeats scheduled routes. No wire to bury across panel rows or along embankment crests.

Technical specification

Figures apply to the standard WJ-T-1300M configuration. The WJ-T-1300M shares its chassis and drivetrain with the WJ-T-1100M but carries a wider twin deck, four blades and a larger fuel tank. Specifications are not transferable to the WJ-T-900A, which is a separate platform with its own deck geometry and cut-height range.

PlatformRubber-track hybrid-electric, all-terrain
Model / deckWJ-T-1300M — 1,300 mm twin deck
Cutting height10–200 mm (lifting deck)
Blades4-blade deck (swing blades), twin-deck arrangement
Blade speed3,000 rpm
Peak efficiency4,500–5,500 m²/h
Net weight470 kg
Overall dimensions1,430 × 1,710 × 680 mm
Max climbing angleUp to 60°
PowertrainBriggs & Stratton 810cc 27 HP drives the cutting deck; a separate battery pack drives the rubber tracks
Control voltage48 V
StartingElectric start with remote start / stop
Endurance6–7 h per full tank
Fuel tank19.0 L
Travel speed0–6 km/h
NavigationRTK-GNSS autonomous, self-developed path planning, no boundary wire
Obstacle avoidanceLiDAR fusion for dynamic obstacles
ControlLarge-screen 2.4G remote controller + mobile app with alarms
OperationAutonomous scheduled routes + manual remote override
Charging dockAuto charging dock included

IP rating and noise level are issued with the per-order datasheet. Machines are built to order, and final configuration is confirmed on the order. Ask for the current WJ-T-1300M datasheet before specifying.

Where the wide deck pays off

Utility-scale solar farms Wind farm access tracks Dam crests & long levees Large orchard blocks Roadside & rail corridors Land reclamation sites

The engine behind the deck

The WJ-T-1300M runs the same Briggs & Stratton PXi 2700 as the rest of the tracked range. It drives the cutting deck only — the tracks run on a separate battery pack.

Briggs & Stratton PXi 2700 810cc 27 gross HP V-twin engine used on the WANJI WJ-T tracked mower platform
Briggs & Stratton PXi 2700. 810cc V-twin, 27.0 gross HP at 3,600 rpm, advanced debris filtering, electric start. Because the engine only turns the deck, its load follows grass conditions rather than the slope.

Frequently asked questions

Deck, fuel, drivetrain and support questions buyers raise before ordering.

What makes the WJ-T-1300M different from the WJ-T-1100M?

Both models share the same wide-deck chassis, drivetrain and navigation. The WJ-T-1100M runs a single 1,100 mm deck with two swing blades; the WJ-T-1300M uses a twin-deck arrangement carrying four blades across 1,300 mm, which lifts output to 4,500–5,500 m²/h and net weight to 470 kg.

How long does the WJ-T-1300M run on one tank?

The 19.0 L tank gives 6–7 hours of mowing per full tank at working load on the 810 engine — the longest run time in the WANJI tracked range.

What engine drives the deck?

A Briggs & Stratton PXi 2700 V-twin — 810cc, 27.0 gross HP — driving the cutting deck only. The rubber tracks run on a separate battery pack, so cut quality does not fall away as the slope increases.

How steep can the WJ-T-1300M work?

Up to 60 degrees, the wide-deck chassis rating shared with the WJ-T-900M and WJ-T-1100M. The WJ-T-900A is a different platform rated to 40 degrees.

How does it compare with the WJ-T-900A?

They are separate platforms. The 900A is a 900 mm three-blade machine rated to 40 degrees with a 20–150 mm cut range. The WJ-T-1300M runs a 1,300 mm four-blade deck with a 10–200 mm cut range and 60-degree capability.

Deck width, configuration, quotation

Tell us the site type, total area and row spacing. We will confirm which deck suits the ground and issue a quotation for your destination.

Request a Quotation