WJ-T-900M Autonomous Mower
The narrowest deck on our wide-deck tracked platform — the same chassis, powertrain and navigation stack as the WJ-T-1100M and WJ-T-1300M, in a 900 mm width. Its 10–200 mm cut range covers manicured turf through to rank grass and light brush without changing machines.
The 900 mm member of the wide-deck platform
Three deck widths, one chassis. Choose 900 mm where access is tight but throughput still matters.
900 mm two-blade deck
Two swing blades on a single lifting deck cut tall growth, weeds and light brush. The 900 mm width fits gateways and service tracks that a 1,300 mm deck cannot pass.
10–200 mm cut range
The widest adjustment range in the range. Set low for maintained turf, raise it for rough grass, weeds and light brush — one machine, both jobs.
Shared with WJ-T-1100M / T-1300M
Chassis, powertrain, navigation and safety systems are common across the wide-deck platform, so service parts and operating procedure carry over between deck widths.
Hybrid powertrain
The Briggs & Stratton 810cc 27 HP engine drives the cutting deck only. A separate battery pack drives the tracks, so no mains power is needed on site.
RTK-GNSS, no boundary wire
Self-developed path planning with centimetre-level positioning. No perimeter wire to bury, repair or re-route when site layout changes.
Slopes up to 60°
Rubber tracks and a low centre of gravity keep the machine working on embankments, dam faces and cut slopes where ride-on mowers cannot operate safely.
WJ-T-900M or WJ-T-900A?
Both are 900 mm tracked hybrids, but they are built on different platforms. The deciding factor is usually the cut-height range and the deck geometry that comes with it.
| WJ-T-900M | WJ-T-900A | |
|---|---|---|
| Platform | Wide-deck platform, shared with WJ-T-1100M / T-1300M | Independent 900A platform |
| Cutting width | 900 mm | 900 mm |
| Cutting height | 10–200 mm | 20–150 mm |
| Deck | 2-blade, swing blades | 3-blade, 2 swing + 1 fixed |
| Max slope | Up to 60° | Up to 40° |
| Typical fit | Sites that need a high cut ceiling — rough grass, weeds and light brush alongside maintained areas | Sites that need a low, precise finish on steep ground, within a 20–150 mm band |
| Shared parts | Chassis, powertrain, navigation and safety systems shared with WJ-T-1100M / T-1300M | Specific to the 900A platform |
Specifications are quoted per model. Parts and settings are not interchangeable between the two 900 mm platforms.
Technical specification
| Model | WJ-T-900M |
|---|---|
| Platform | Rubber-track hybrid-electric, wide-deck (shared with WJ-T-1100M / WJ-T-1300M) |
| Cutting width | 900 mm |
| Cutting height | 10–200 mm (lifting deck) |
| Blades | 2-blade deck, swing blades |
| Blade speed | 3,000 rpm |
| Powertrain | Briggs & Stratton 810cc 27 HP drives the cutting deck; a separate battery pack drives the rubber tracks |
| Control voltage | 48 V |
| Starting | Electric start with remote start / stop |
| Max climbing angle | Up to 60° |
| Endurance | 2.5–3 h per full tank |
| Peak efficiency | 3,000–4,000 m²/h |
| Net weight | 350 kg |
| Overall dimensions | 1,400 × 1,300 × 630 mm |
| Fuel tank | 6.6 L |
| Ingress protection | Issued with the per-order datasheet |
| Noise level | Issued with the per-order datasheet |
| Navigation | RTK-GNSS autonomous, self-developed path planning, no boundary wire |
| Obstacle avoidance | LiDAR fusion for dynamic obstacles |
| Battery pack | Specification not published — confirmed with the per-order datasheet |
Figures apply to the standard configuration. Values marked as issued per order are confirmed against the datasheet for your build; they are not carried over from other models.
Where the 900M fits best
Documents
The dedicated WJ-T-900M datasheet is issued per order. The shared platform documents are available now.
Other models in the range
The engine behind the deck
The 900M runs the same Briggs & Stratton PXi 2700 as the WJ-T-1100M and WJ-T-1300M. It drives the cutting deck only — the tracks run on a separate battery pack.
Frequently asked questions
Deck, fuel, drivetrain and support questions buyers raise before ordering.
How is the WJ-T-900M different from the WJ-T-900A?
Same 900 mm cutting width, different platform. The 900M uses a two-blade deck with a 10–200 mm cut range and climbs to 60 degrees; the 900A uses a three-blade deck with 20–150 mm and 40 degrees. Deck geometry, cut-height range and service items are not interchangeable between them.
What deck and blade setup does the 900M use?
A single 900 mm deck with two swing blades and a 10–200 mm cutting-height range. The deck lifts for maintained turf, rough grass and light brush; it is a different deck assembly from the 900A, and parts are not interchangeable.
What is the fuel tank size and run time?
6.6 L, giving 2.5–3 hours of continuous mowing. The 900M shares the wide-deck chassis with the WJ-T-1100M and WJ-T-1300M, but the smaller deck means it covers less area per fill than either.
Does it use the same engine as the rest of the range?
Yes. A Briggs & Stratton PXi 2700 V-twin, 810cc, 27.0 gross HP, driving the cutting deck only. The tracks run on a separate battery pack, so engine load stays tied to grass conditions rather than to slope.
Is it the same chassis as the WJ-T-1100M and WJ-T-1300M?
Yes. The 900M is the 900 mm member of the wide-deck platform: the WJ-T-1100M is a 1,100 mm two-blade machine and the WJ-T-1300M is a 1,300 mm twin-deck four-blade machine. Chassis, powertrain, navigation and safety systems are shared.
Not sure which 900 mm machine fits your site?
Tell us the site type, total area, typical growth height and slope. We will confirm whether the 900M or the 900A suits the ground and issue a quotation for your destination.
